SN74LVCC4245ANSRE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOP |
| Number of Pins | 24 |
| Weight | 307.790773mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 24 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | TWO SEPARATE POWER-SUPPLY RAILS FOR PORT A 4.5V TO 5.5V AND PORT B 2.7V TO 5.5V |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Pin Count | 24 |
| Output Type | Voltage |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 3.35V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Ports | 2 |
| Current - Output | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 7 ns |
| Quiescent Current | 80μA |
| Turn On Delay Time | 10.2 ns |
| Family | LVC/LCX/Z |
| Logic Function | Transceiver, Translator |
| Data Rate | 200 Mbps |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS TRANSCEIVER |
| High Level Output Current | -24mA |
| Low Level Output Current | 24mA |
| Control Type | COMMON CONTROL |
| Translation | N/A |
| Height Seated (Max) | 2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74LVCC4245ANSRE4 Overview
The SOP package contains it.Tape and Reel is the packaging method.Level translators uses Voltage as level translatorss output configuration.Usually, when a transmission line is terminated, there are 24 termination points used.Power comes from a voltage of 3.3V.The device has a pin count of 24.24 pins are used in its design.The design of this electronic part contains 8 bits.5.5V is the maximum supply voltage it can handle.4.5V is its minimum supply voltage.The way of mounting this electronic part is Surface Mount.Level translators belongs to the group of Bus Driver/Transceivers.BUS TRANSCEIVER is the logic IC it uses.2 terminations are used as the methods of ending a transmission line with a device that matches the line's characteristic impedance.In the world of electronics, this electronic device belongs to the family of LVC/LCX/Z.Without external influence, it consumes 80μA of quiescent current.A 3.35V power supply is required for it to operate.There are also characteristics of TWO SEPARATE POWER-SUPPLY RAILS FOR PORT A 4.5V TO 5.5V AND PORT B 2.7V TO 5.5V associated with it.Level translators is recommended that the operating temperature be higher than -40°C.Level translators is recommended that the operating temperature not exceed 85°C.In total, it has 1 elements.As a result of its 24mA output current, it allows for maximum design flexibility.
SN74LVCC4245ANSRE4 Features
SOP package
24 pin count
24 pins
3.35V power supplies
1 elements
SN74LVCC4245ANSRE4 Applications
There are a lot of Texas Instruments SN74LVCC4245ANSRE4 voltage translators & level shifters applications.
- Desktop PC
- Telecom
- Power-sensitive applications
- LCD Panels Using GIP / GOA / ASG Technology
- Tablet PCs
- Smartphone
- One Fabrication Site
- Electronic Points of Sale
- Driving indicator LEDs or buzzers
- MDIO