SN74LVC574AQDWRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 495.011023mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100, 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.7V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LVC574 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 150MHz |
| Propagation Delay | 8 ns |
| Turn On Delay Time | 4.6 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 10μA |
| Current - Output High, Low | 24mA 24mA |
| Max Propagation Delay @ V, Max CL | 7ns @ 3.3V, 50pF |
| Prop. Delay@Nom-Sup | 7 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Number of Input Lines | 2 |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVC574AQDWRQ1 Overview
The flip flop is packaged in 20-SOIC (0.295, 7.50mm Width). D flip flop is embedded in the Tape & Reel (TR) package. It is configured with Tri-State, Non-Invertedas an output. The trigger it is configured with uses Positive Edge. Surface Mountis in the way of this electric part. A voltage of 2V~3.6Vis required for its operation. In the operating environment, the temperature is -40°C~125°C TA. It is an electronic flip flop with the type D-Type. The Automotive, AEC-Q100, 74LVCseries comprises this type of FPGA. It should not exceed 150MHzin terms of its output frequency. A total of 1 elements are present. T flip flop consumes 10μA quiescent energy. There have been 20 terminations. The object belongs to the 74LVC574 family. Power is supplied from a voltage of 2.7V volts. Its input capacitance is 4pF farads. LVC/LCX/Zis the family of this D flip flop. There is an electronic part that is mounted in the way of Surface Mount. Basically, it is designed with a set of 20 pins. This device's clock edge trigger type is Positive Edge. This part is included in FF/Latches. The design is based on 8bits. If you want to maintain normal operation, you should keep the supply voltage (Vsup) above 2V. To achieve this superior flexibility, 8 circuits are used. This D flip flop is well suited for TR based on its reliable performance. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. It operates with 3 output lines. The number of input lines is 2.
SN74LVC574AQDWRQ1 Features
Tape & Reel (TR) package
Automotive, AEC-Q100, 74LVC series
20 pins
8 Bits
SN74LVC574AQDWRQ1 Applications
There are a lot of Texas Instruments SN74LVC574AQDWRQ1 Flip Flops applications.
- Buffered Clock
- Circuit Design
- QML qualified product
- Bounce elimination switch
- Frequency Dividers
- Event Detectors
- Balanced 24 mA output drivers
- Individual Asynchronous Resets
- Functionally equivalent to the MC10/100EL29
- ESCC