SN74LVC574APWRE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceiver |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LVC574 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Clock Frequency | 150MHz |
| Propagation Delay | 7.8 ns |
| Turn On Delay Time | 7 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 10μA |
| Current - Output High, Low | 24mA 24mA |
| Max I(ol) | 0.024 A |
| Max Propagation Delay @ V, Max CL | 6.8ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Number of Input Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Length | 6.5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVC574APWRE4 Overview
The package is in the form of 20-TSSOP (0.173, 4.40mm Width). It is contained within the Tape & Reel (TR)package. T flip flop uses Tri-State, Non-Invertedas its output configuration. There is a trigger configured with Positive Edge. It is mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of 1.65V~3.6V volts. In this case, the operating temperature is -40°C~125°C TA. It is an electronic flip flop with the type D-Type. In this case, it is a type of FPGA belonging to the 74LVC series. Its output frequency should not exceed 150MHz Hz. The element count is 1 . This process consumes 10μA quiescents. In 20terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. JK flip flop belongs to 74LVC574 family. It is powered from a supply voltage of 1.8V. A 4pFfarad input capacitance is provided by this T flip flop. In this case, the D flip flop belongs to the LVC/LCX/Zfamily. A part of the electronic system is mounted in the way of Surface Mount. There are 20pins on it. It has a clock edge trigger type of Positive Edge. The part you are looking for is included in Bus Driver/Transceiver. An electronic part designed with 8bits is used in this application. The superior flexibility of this product is achieved by using 8 circuits. A reliable performance of this D flip flop makes it well suited for use in TR. A total of 2ports are embedded in the D flip flop. Its output current of 24mAallows for maximum design flexibility. This input has 3lines in it.
SN74LVC574APWRE4 Features
Tape & Reel (TR) package
74LVC series
20 pins
8 Bits
SN74LVC574APWRE4 Applications
There are a lot of Texas Instruments SN74LVC574APWRE4 Flip Flops applications.
- EMI reduction circuitry
- Set-reset capability
- Shift registers
- Safety Clamp
- Pattern generators
- Test & Measurement
- Synchronous counter
- CMOS Process
- Buffered Clock
- Single Down Count-Control Line