SN74LVC374ADBRE4
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 156.687814mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LVC374 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Clock Frequency | 100MHz |
| Propagation Delay | 8.1 ns |
| Turn On Delay Time | 1.5 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 10μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Max Propagation Delay @ V, Max CL | 7ns @ 3.3V, 50pF |
| Prop. Delay@Nom-Sup | 7 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Number of Input Lines | 2 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2mm |
| Length | 7.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVC374ADBRE4 Overview
The package is in the form of 20-SSOP (0.209, 5.30mm Width). D flip flop is embedded in the Tape & Reel (TR) package. Currently, the output is configured to use Tri-State, Non-Inverted. The trigger configured with it uses Positive Edge. The electronic part is mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 1.65V~3.6V. A temperature of -40°C~85°C TAis used in the operation. It is an electronic flip flop with the type D-Type. The 74LVCseries comprises this type of FPGA. It should not exceed 100MHzin its output frequency. The list contains 1 elements. Despite external influences, it consumes 10μAof quiescent current. Currently, there are 20 terminations. The 74LVC374family includes it. The D flip flop is powered by a voltage of 1.8V . The input capacitance of this T flip flop is 4pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. A device of this type belongs to the family of LVC/LCX/Z. Surface Mount mounts this electronic component. This board is designed with 20pins on it. There is a clock edge trigger type of Positive Edgeon this device. This RS flip flops is a part number FF/Latches. This flip flop is designed with 8 Bits. It reaches 3.6Vwhen the supply voltage is maximal (Vsup). To achieve this superior flexibility, 8 circuits are used. In light of its reliable performance, this T flip flop is well suited for TR. It runs on 3.3Vvolts of power. This D flip flop is equipped with 0 ports. This T flip flop features a maximum design flexibility due to its output current of 24mA. This input has 2lines in it.
SN74LVC374ADBRE4 Features
Tape & Reel (TR) package
74LVC series
20 pins
8 Bits
3.3V power supplies
SN74LVC374ADBRE4 Applications
There are a lot of Texas Instruments SN74LVC374ADBRE4 Flip Flops applications.
- Data storage
- Power down protection
- Storage Registers
- Frequency Divider circuits
- Shift Registers
- Latch-up performance
- 2 – Bit synchronous counter
- Memory
- Registers
- Instrumentation