SN74LVC2G80YEPR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-XFBGA, DSBGA |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74LVC |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 1.65V~5.5V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LVC2G80 |
| JESD-30 Code | R-XBGA-B8 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Inverted |
| Number of Elements | 2 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Load Capacitance | 50pF |
| Clock Frequency | 160MHz |
| Turn On Delay Time | 1.1 ns |
| Family | LVC/LCX/Z |
| Current - Quiescent (Iq) | 5μA |
| Current - Output High, Low | 32mA 32mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 4.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 0.5mm |
| Width | 0.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74LVC2G80YEPR Overview
It is packaged in the way of 8-XFBGA, DSBGA. A package named Cut Tape (CT)includes it. As configured, the output uses Inverted. It is configured with the trigger Positive Edge. There is an electric part mounted in the way of Surface Mount. A voltage of 1.65V~5.5Vis required for its operation. In this case, the operating temperature is -40°C~85°C TA. This logic flip flop is classified as type D-Type. The 74LVCseries comprises this type of FPGA. You should not exceed 160MHzin the output frequency of the device. In total, it contains 2 elements. As a result, it consumes 5μA of quiescent current without being affected by external factors. A total of 8 terminations have been made. JK flip flop belongs to 74LVC2G80 family. The power supply voltage is 1.8V. A 3.5pFfarad input capacitance is provided by this T flip flop. A device of this type belongs to the family of LVC/LCX/Z. It is mounted by the way of Surface Mount. The clock edge trigger type for this device is Positive Edge. The part is included in FF/Latches. There is a 5.5Vmaximum supply voltage (Vsup). In view of its reliability, this D flip flop is a good fit for TAPE AND REEL. There are 3.3V power supplies attached to it.
SN74LVC2G80YEPR Features
Cut Tape (CT) package
74LVC series
3.3V power supplies
SN74LVC2G80YEPR Applications
There are a lot of Texas Instruments SN74LVC2G80YEPR Flip Flops applications.
- Latch-up performance
- Convert a momentary switch to a toggle switch
- Divide a clock signal by 2 or 4
- Common Clocks
- Frequency Divider circuits
- ESD performance
- Bounce elimination switch
- Event Detectors
- EMI reduction circuitry
- Storage Registers