SN74LVC2G66YZAR
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-XFBGA, DSBGA |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Terminal Finish | TIN SILVER COPPER |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 8 |
| JESD-30 Code | R-XBGA-B8 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| -3db Bandwidth | 300MHz |
| On-State Resistance (Max) | 10Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 42 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 6pF |
| On-state Resistance Match-Nom | 5Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 3.9ns, 6.3ns |
| Channel-to-Channel Matching (ΔRon) | 2 Ω (Max) |
| Crosstalk | -58dB @ 1MHz |
| Switch-on Time-Max | 5.6ns |
| Switch-off Time-Max | 6.9ns |
| Voltage - Supply, Single (V+) | 1.65V~5.5V |
| Height Seated (Max) | 0.5mm |
| Length | 1.9mm |
| RoHS Status | ROHS3 Compliant |
SN74LVC2G66YZAR Overview
The electronic component is convenient to ship overseas because it is packed in a 8-XFBGA, DSBGA. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). In Surface Mount, you'll find this switch device. 1:1 is the number of circuits in the multiplexer and demultiplexer. Extended operating temperature around -40°C~85°C TA. In total, there have been 8 terminations. The electronic part provides high-quality output because it has 1 channels. Powered by a 2.3V voltage supply, the electrical part should be switched on and run. There are 8 pins injected into the electronic part body. Unlike digital switches, these are based on SPST - NO switching circuits. A 2 circuit is present in this switch device. A voltage of 1.65V~5.5V is required for this switch device, which drains from a single voltage source.
SN74LVC2G66YZAR Features
1 Channels
Switch Circuit: SPST - NO
-3db Bandwidth: 300MHz
SN74LVC2G66YZAR Applications
There are a lot of Rochester Electronics, LLC SN74LVC2G66YZAR Analog Switches & Multiplexers ICs applications.
- Private Branch Exchange (PBX)
- CSU
- Intelligent PBX
- New designs requiring multiplexer functions
- Digital access cross connects
- Access Concentrators
- FTTH
- Digital cross connects (DSX-1)
- E1 Multiplexer
- ATM