SN74LVC2G53DCTRE4
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-LSSOP, 8-MSOP (0.110, 2.80mm Width) |
| Number of Pins | 8 |
| Weight | 23.388357mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 13Ohm |
| Subcategory | Multiplexers or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LVC2G53 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Power Supplies | 3.3V |
| Number of Channels | 2 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 1μA |
| Max Supply Current | 1μA |
| Propagation Delay | 600 ps |
| Turn On Delay Time | 10.3 ns |
| Supply Type | Single |
| Turn-Off Delay Time | 9.4 ns |
| -3db Bandwidth | 300MHz |
| On-State Resistance (Max) | 13Ohm |
| High Level Output Current | 50mA |
| Low Level Output Current | 50mA |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF |
| On-state Resistance Match-Nom | 5Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 4.5ns, 8ns |
| Channel-to-Channel Matching (ΔRon) | 2 Ω (Max) |
| Crosstalk | -58dB @ 1MHz |
| Switch-off Time-Max | 7.9ns |
| Voltage - Supply, Single (V+) | 1.65V~5.5V |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVC2G53DCTRE4 Overview
This electronic part is conveniently packaged in 8-LSSOP, 8-MSOP (0.110, 2.80mm Width), making it easy to ship abroad. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. It is mounted in the position Surface Mount. Multiplexers and demultiplexers have the same number of circuits 2:1. Operating temperature around -40°C~85°C TA extended. There are 8 terminations totally. As a result of its 2 channels, this electronic component provides high-quality output. If the voltage supply is 2.3V volts, the electrical component should be turned on and run. This electrical component is included in the 8 series of products. Multiplexers built on a SPDT switching circuit are built. A total of 1 circuits make up this switch device. Use 74LVC2G53 to search for variants of the digital switches. An switch multiplexer with 13Ohm internal resistance has a value of 13Ohm. To find out what the 8 pins do, please refer to the datasheets. A analogue multiplexer of this type is a Multiplexers or Switches. It is generally not recommended to supply a voltage higher than 5.5V to the switch device in normal circumstances. A analog switch ic that has a cost-effective Single supply type. A low voltage of 1.65V should be applied to the electronic component. An operating current of 1μA would be sufficient for this switch device. A voltage of 1.65V~5.5V is required to drain this analog switch from a single voltage supply. Putting voltage greater than 1μA on the multiplexer may cause damage. 2 outputs are included in the analogue multiplexer.
SN74LVC2G53DCTRE4 Features
2 Channels
Switch Circuit: SPDT
1μA Supply Current
-3db Bandwidth: 300MHz
SN74LVC2G53DCTRE4 Applications
There are a lot of Texas Instruments SN74LVC2G53DCTRE4 Analog Switches & Multiplexers ICs applications.
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Sample-and-hold systems
- Frame Relay Equipment
- SONET
- Microwave transmission systems
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Digital access cross connects
- Cable Modem
- Avionics
- Digital Cross-Connects