SN74LVC1T45DBVTG4
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Weight | 6.492041mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.95mm |
| Base Part Number | 74LVC1T45 |
| Pin Count | 6 |
| Output Type | Tri-State, Non-Inverted |
| Polarity | Non-Inverting |
| Power Supplies | 3.3V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Number of Ports | 2 |
| Number of Bits | 1 |
| Propagation Delay | 17.7 ns |
| Quiescent Current | 3μA |
| Turn On Delay Time | 36.2 ns |
| Family | LVC/LCX/Z |
| Logic Function | Transceiver, Translator |
| Data Rate | 420Mbps |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS TRANSCEIVER |
| Max I(ol) | 0.032 A |
| High Level Output Current | -32mA |
| Channel Type | Bidirectional |
| Low Level Output Current | 32mA |
| Control Type | COMMON CONTROL |
| Power Supply Current-Max (ICC) | 0.004mA |
| Translator Type | Voltage Level |
| Voltage - VCCA | 1.65V~5.5V |
| Voltage - VCCB | 1.65V~5.5V |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LVC1T45DBVTG4 Overview
In the SOT-23-6 package, it is embedded.Tape & Reel (TR) is the packaging method.Level translators uses Tri-State, Non-Inverted as the output.The translator type of this electrical device is Voltage Level.Mounting this electronic component follows the Surface Mount method.A Bidirectional channel type is associated with this electrical device.-40°C~85°C TA is the operating temperature.0 terminations are used to end transmission lines.A base part number 74LVC1T45 indicates the related parts.In order for it to operate, it needs to be powered by a voltage of 1.8V.With 6 pins, it is equipped with a minimal number of connections.Level translators is a type of FPGA belonging to the 74LVC series.The board has 6 pins.The design of this electronic part is based on 1 bits.There is a maximum voltage of 5.5V supported.A voltage of 1.65V is the minimum supply voltage required for it to operate.A VCCA supply rail is configured as 1.65V~5.5V.VCCB is configured with a supply rail that starts at 1.65V~5.5V.Electronic parts are mounted using Surface Mount.There are no channels.Bus Driver/Transceivers contains this part.Level translators uses a logic IC of type BUS TRANSCEIVER.2 terminations are used to end transmission lines by matching their characteristic impedance with the device.LVC/LCX/Z is the family name of this electronic device.Level translators consumes 3μA of quiescent current wLevel translatorshout being affected by outside factors.There is a 3.3V power supply used in the operation of the machine.Considering its reliability, this device is appropriate for TR.
SN74LVC1T45DBVTG4 Features
SOT-23-6 package
6 pin count
74LVC series
6 pins
3.3V power supplies
SN74LVC1T45DBVTG4 Applications
There are a lot of Texas Instruments SN74LVC1T45DBVTG4 voltage translators & level shifters applications.
- One Fabrication Site
- Extended Product-Change Notification
- Automotive infotainment
- I2C / SMBus
- Industrial
- PMBus
- Personal computing
- Controlled Baseline
- Product Traceability
- UART