SN74LVC1G80QDCKRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100, 74LVC |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 5 |
| Type | D-Type |
| Terminal Finish | Matte Tin (Sn) |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 1.65V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 3.3V |
| Base Part Number | 74LVC1G80 |
| Function | Standard |
| Output Type | Inverted |
| Number of Elements | 1 |
| Number of Bits | 1 |
| Clock Frequency | 160MHz |
| Family | LVC/LCX/Z |
| Current - Quiescent (Iq) | 10μA |
| Current - Output High, Low | 32mA 32mA |
| Max I(ol) | 0.032 A |
| Max Propagation Delay @ V, Max CL | 5.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| RoHS Status | ROHS3 Compliant |
SN74LVC1G80QDCKRQ1 Overview
In the form of 5-TSSOP, SC-70-5, SOT-353, it has been packaged. As part of the package Tape & Reel (TR), it is embedded. T flip flop uses Invertedas its output configuration. Positive Edgeis the trigger it is configured with. In this case, the electronic component is mounted in the way of Surface Mount. A 1.65V~5.5Vsupply voltage is required for it to operate. The operating temperature is -40°C~125°C TA. This logic flip flop is classified as type D-Type. The Automotive, AEC-Q100, 74LVCseries comprises this type of FPGA. Its output frequency should not exceed 160MHz Hz. In total, there are 1 elements. As a result, it consumes 10μA of quiescent current without being affected by external factors. There are 5 terminations,You can search similar parts based on 74LVC1G80. A voltage of 3.3V is used as the power supply for this D latch. The input capacitance of this T flip flop is 3.5pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. It is a member of the LVC/LCX/Zfamily of D flip flop. It is designed with 5 pins. There are 1bits in this flip flop. In light of its reliable performance, this T flip flop is well suited for TR.
SN74LVC1G80QDCKRQ1 Features
Tape & Reel (TR) package
Automotive, AEC-Q100, 74LVC series
5 pins
1 Bits
SN74LVC1G80QDCKRQ1 Applications
There are a lot of Texas Instruments SN74LVC1G80QDCKRQ1 Flip Flops applications.
- Bus hold
- Data storage
- EMI reduction circuitry
- Bounce elimination switch
- Automotive
- Data transfer
- Set-reset capability
- Shift Registers
- Digital electronics systems
- Storage registers