| Parameters |
| Factory Lead Time |
8 Weeks |
| Lifecycle Status |
ACTIVE (Last Updated: 4 days ago) |
| Contact Plating |
Gold |
| Mount |
Surface Mount |
| Mounting Type |
Surface Mount |
| Package / Case |
SOT-563, SOT-666 |
| Number of Pins |
6 |
| Weight |
2.806603mg |
| Operating Temperature |
-40°C~85°C TA |
| Packaging |
Tape & Reel (TR) |
| JESD-609 Code |
e4 |
| Pbfree Code |
yes |
| Part Status |
Active |
| Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
| Number of Terminations |
6 |
| ECCN Code |
EAR99 |
| Resistance |
15Ohm |
| Subcategory |
Multiplexers or Switches |
| Technology |
CMOS |
| Terminal Position |
DUAL |
| Peak Reflow Temperature (Cel) |
260 |
| Number of Functions |
1 |
| Supply Voltage |
2.3V |
| Terminal Pitch |
0.5mm |
| Base Part Number |
74LVC1G3157 |
| Pin Count |
6 |
| Number of Outputs |
2 |
| Polarity |
Non-Inverting |
| Number of Channels |
1 |
| Number of Circuits |
1 |
| Max Supply Voltage |
5.5V |
| Min Supply Voltage |
1.65V |
| Operating Supply Current |
1μA |
| Nominal Supply Current |
1μA |
| Max Supply Current |
10μA |
| Propagation Delay |
300 ps |
| Turn On Delay Time |
5.7 ns |
| Supply Type |
Single |
| Bandwidth |
300MHz |
| Turn-Off Delay Time |
3.8 ns |
| -3db Bandwidth |
340MHz |
| On-State Resistance (Max) |
15Ohm |
| High Level Output Current |
128mA |
| Low Level Output Current |
128mA |
| Multiplexer/Demultiplexer Circuit |
2:1 |
| Off-state Isolation-Nom |
57 dB |
| Channel Capacitance (CS(off), CD(off)) |
5.2pF |
| On-state Resistance Match-Nom |
0.1Ohm |
| Switch Circuit |
SPDT |
| Switch Time (Ton, Toff) (Max) |
5.7ns, 3.8ns |
| Charge Injection |
7pC |
| Channel-to-Channel Matching (ΔRon) |
100m Ω |
| Crosstalk |
-54dB @ 10MHz |
| Switching |
BREAK-BEFORE-MAKE |
| Switch-off Time-Max |
7.5ns |
| Voltage - Supply, Single (V+) |
1.65V~5.5V |
| Normal Position |
NC |
| Height |
600μm |
| Length |
1.6mm |
| Width |
1.2mm |
| Thickness |
550μm |
| Radiation Hardening |
No |
| REACH SVHC |
No SVHC |
| RoHS Status |
ROHS3 Compliant |
| Lead Free |
Lead Free |
SN74LVC1G3157DRLR Overview
Packed in SOT-563, SOT-666, the electronic component is convenient for shipping overseas. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. This analog switch is mounted in Surface Mount. Multiplexer and demultiplexer circuits have a number 2:1. Around -40°C~85°C TA is the extended operating temperature. Total terminations are 6. As a result of its 1 channels, this electronic component provides high-quality output. Powered by a 2.3V voltage supply, the electrical part should be switched on and run. The electronic part body is injected with 6 pins. Circuits based on SPDT switching are used to construct these analog switch ics. The multiplexer consists of 1 circuits. Try searching with 74LVC1G3157 if you're looking for variants. This digital multiplexer has 15Ohm internal resistance. For functions related to 6 pins, please refer to the datasheets. A analogue multiplexer of this type is a Multiplexers or Switches. It is generally not recommended to supply a voltage higher than 5.5V to the switch device in normal circumstances. Single supply type digital switch with a low cost. It is recommended that the electrical component receives a voltage of 1.65V. An operating current of 1μA would be sufficient for this switch device. An analogue multiplexer drains from a single voltage supply at 1.65V~5.5V. The analogue multiplexer may be damaged if voltage is greater than 10μA. It is possible to transfer data over a 300MHz-bandwidth. Multiplexer ics with 2 outputs are available.
SN74LVC1G3157DRLR Features
1 Channels
Switch Circuit: SPDT
1μA Supply Current
-3db Bandwidth: 340MHz
Bandwidth: 300MHz
SN74LVC1G3157DRLR Applications
There are a lot of Texas Instruments SN74LVC1G3157DRLR Analog Switches & Multiplexers ICs applications.
- Audio/video switches
- ATM
- Audio and video routing
- Routers
- Public switching systems
- Communications systems
- Relay replacements
- Automatic test equipment
- 65 V DACs
- Cable Modem