SN74LVC157APWRE4
| Parameters | |
|---|---|
| Load Capacitance | 50pF |
| Power Dissipation | 500mW |
| Number of Bits | 2 |
| Propagation Delay | 8.1 ns |
| Family | LVC/LCX/Z |
| Number of Inputs | 8 |
| Current - Output High, Low | 24mA 24mA |
| Supply Type | Single |
| Bandwidth | 100MHz |
| Output Polarity | TRUE |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Multiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 1.8V |
| Base Part Number | 74LVC157 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Max Output Current | 24mA |
| Circuit | 4 x 2:1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Number of Channels | 4 |
SN74LVC157APWRE4 Overview
This is a relatively small item of digital switch that is included in the 16-TSSOP (0.173, 4.40mm Width) in order to save space on the board.The package is packaged in accordance with Tape & Reel (TR).Digital switch ic adheres to a mounting method of Surface Mount.The multiplexers uses an analog IC Multiplexer as the analog part of the circuit.The operating temperature of -40°C~85°C will not be susceptible to external factors.Designers have greater flexibility using digital controlled switch when it works with 2V~3.6V voltage.Multiplexers from the 74LVC series can be used in a wide range of applications.Its basic configuration includes terminations in the 16 range.There is a base part number 74LVC157 that can be used to locate signal switch's related components as well.The multiplexer's system is supplied with a voltage of 1.8V.This turn signal switch consists of 16 component pins.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.This supply type employs Single.The board has 16 pins configured.The mount is in Surface Mount.In the LVC/LCX/Z family, the logic switch is included.Signal multiplexer contains 2 bits.To avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 3.6V.In order to maintain mux switch's normal operation, power is provided to 3.3V.There are 1 outputs designed for the operation of the turn signal switch.This multiplexer is equipped with 8 inputs and 8 outputs.The switches package is packaged in accordance with the TR method.A total of 4 channels are used for transmission in the turn signal switch's circuit.
SN74LVC157APWRE4 Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 3.3V
SN74LVC157APWRE4 Applications
There are a lot of Texas Instruments SN74LVC157APWRE4 Signal Switches / Multiplexers / Decoders applications.
- Electronics industry
- To select different devices in microprocessor output
- Data demultiplexing
- Image transmission
- Make full adder
- Solenoid cooling fan
- CPU memory location identification
- High-performance memory-decoding applications
- Enabling different rows of memory depending on address in memory chips
- Computer memory