SN74LV595APWTG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Number of Bits | 8 |
| Propagation Delay | 10.2 ns |
| Turn On Delay Time | 25.5 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Output Lines | 9 |
| fmax-Min | 45 MHz |
| Max Frequency@Nom-Sup | 40000000Hz |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74LV595APWTG4 Overview
There is an embedded device in the package TSSOP. 16 is the number of terminations on the chip. This item is packed in case Tape and Reel. 2.5V is the operating supply voltage of the part. The part consists of 1 elements. In this device, there are 16 pins. The mounting method should be Surface Mount. An electronic component is included in the LV/LV-A/LVX/H. According to the specification, this chip's operating supply voltage falls within the range of 5V. Additional aspects of this section include: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT. Voltage can be delivered at 3.3V by the device. The total number of IC chip bits is 8. This board has 16 pins in total. It should be used below 85°C. This device should not be operated with a value lower than -40°C. We use this supply voltage under 5.5V. A voltage higher than 2V is used as a supply voltage. A total of 9 output lines are available for operation.
SN74LV595APWTG4 Features
With 16 pins
Operate supply voltage at 5V
It supplies 3.3V power
With 9 output lines
SN74LV595APWTG4 Applications
There are a lot of Texas Instruments SN74LV595APWTG4 Shift Registers applications.
- Pulse Extenders
- Serial to parallel converter
- Data Processors
- Pattern Recognizers
- Dual-rank shift, hold, and bus applications
- Generate time delay toward digital circuits
- 8-bit data storage
- Counter
- Serial-to-parallel data conversion
- Sequence generator