SN74LV595APWT
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LV |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Frequency | 170MHz |
| Base Part Number | 74LV595 |
| Function | Serial to Parallel, Serial |
| Output Type | Tri-State |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 25.5 ns |
| Turn On Delay Time | 25.5 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Max I(ol) | 0.05 A |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 0.02mA |
| Input Current | 1μA |
| Number of Output Lines | 9 |
| fmax-Min | 45 MHz |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LV595APWT Overview
There is a 16-TSSOP (0.173, 4.40mm Width) package embedded with the device. There are 16 terminations on the chip. This item is packed in case Tape & Reel (TR). Voltage rating of the part is 2.5V. A total of 1 elements can be found on this part. 16 pins are present on the device. The recommended mounting method is Surface Mount. Electronic components are categorized as LV/LV-A/LVX/H. This component is mounted in the way of Surface Mount. It is important to note that the operating temperature range is -40°C~85°C. There is a votage of 2V~5.5V provided with it. In this case, the electrical component belongs to the series 74LV. Search for similar parts based on the 74LV595 family. There are also the following additional considerations in this section: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT. For this part, the minimum supply voltage (Vsup) should not be less than 2V. It can deliver voltage at 3.3V. Vsup cannot exceed 5.5V for this part. A total of 9 output lines need to be operated. TR is used to package the part. 170MHz is the frequency of the device.
SN74LV595APWT Features
With 16 pins
Mounted in Surface Mount type.
Based on 74LV595 family
It supplies 3.3V power
With 9 output lines
Packing Method : TR
SN74LV595APWT Applications
There are a lot of Texas Instruments SN74LV595APWT Shift Registers applications.
- Output expansion
- Data Processors
- Remote control holding register
- LED matrix control
- Pattern Recognizers
- Interconnectors
- Data Format Converters
- Flash Memory
- Remote control holding register
- Delay Line