SN74LV595AIPWREP
| Parameters | |
|---|---|
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 0.02mA |
| Number of Input Lines | 1 |
| Max Frequency@Nom-Sup | 40000000Hz |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LV |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | SISO OPERATION ALSO AVAILABLE |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LV595 |
| Function | Serial to Parallel, Serial |
| Number of Outputs | 9 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 10.2 ns |
| Turn On Delay Time | 25.5 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Max I(ol) | 0.05 A |
SN74LV595AIPWREP Overview
There is a 16-TSSOP (0.173, 4.40mm Width) package embedded with the device. It sums up to 16 where the chip's terminations add up. The Tape & Reel (TR) case contains it. This part has an operating supply voltage of 2.5V. It is equipped with a pin count of 16. It is recommended to mount by Surface Mount in order to get the best results. The electronic component belongs to the LV/LV-A/LVX/H. This component is mounted in the way of Surface Mount. It is important to note that the operating temperature range is -40°C~85°C. The voltage supplied to it is within the range of 2V~5.5V. 74LV is the series number of this electrical component. Based on the 74LV595 family, you can search for similar parts. It's noted that the chip's operating supply voltage is in the range 5V. The following additional aspects of this section are worth noting: SISO OPERATION ALSO AVAILABLE. There should be no voltage less than 2V at the minimum supply voltage (Vsup). This device has 1 input lines available. There is a possibility of delivering voltage at 3.3V. TR is used to package the part. There are 9 outputs available on this part.
SN74LV595AIPWREP Features
With 16 pins
Mounted in Surface Mount type.
Based on 74LV595 family
Operate supply voltage at 5V
It supplies 3.3V power
Packing Method : TR
SN74LV595AIPWREP Applications
There are a lot of Texas Instruments SN74LV595AIPWREP Shift Registers applications.
- Interconnectors
- Parallel to serial converter
- Data manipulation
- store data in digital form
- Remote control holding register
- Serial-to-parallel data conversion
- 8-bit data storage
- Flash Memory
- Sequence generator
- Parallel data