SN74LV595ADE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Number of Bits | 8 |
| Propagation Delay | 10.2 ns |
| Turn On Delay Time | 25.5 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Output Lines | 9 |
| fmax-Min | 45 MHz |
| Max Frequency@Nom-Sup | 50000000Hz |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74LV595ADE4 Overview
SOIC package contains the device. 16 is the number of terminations on the chip. It is packed in a case number Rail/Tube. Its operating supply voltage is rated at 2.5V. The part consists of 1 elements. Devices with 16 pins are available. It is recommended that the mount should be done by Surface Mount. There is an electronic component in the LV/LV-A/LVX/H. In terms of supply voltage, this chip operates within the range of 5V. Additional aspects of this section include: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT. A voltage of 3.3V is possible with this device. A total of 8 bits are present on an IC chip. It has a total of 16 pins. A temperature below 85°C is recommended for its use. Ideally, it should not fall below -40°C. It is used under the 5.5V supply voltage. Voltages higher than 2V are used for this supply. 9 output lines are available for operation.
SN74LV595ADE4 Features
With 16 pins
Operate supply voltage at 5V
It supplies 3.3V power
With 9 output lines
SN74LV595ADE4 Applications
There are a lot of Texas Instruments SN74LV595ADE4 Shift Registers applications.
- Remote control holding register
- Interconnectors
- Delay Line
- data transfer
- Remote control holding register
- Sequence generator
- temporary data storage
- Cache memory in CPU
- Flash Memory
- 8-bit data storage