SN74LV594APWTE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 16 |
| Weight | 59.987591mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Number of Bits | 8 |
| Propagation Delay | 9.2 ns |
| Turn On Delay Time | 19 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Output Lines | 9 |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74LV594APWTE4 Overview
The device is embedded in TSSOP package. There are 16 terminations on the chip. Tape and Reel is the case in which it is packed. A voltage of 2.5V is specified for the part's operating supply. A total of 1 elements can be found on this part. 16 pins are provided on the device. Surface Mount is recommended for mounting. This electronic component is classified as LV/LV-A/LVX/H. It is noted that the operating supply voltage of this chip falls within the range 5V. This section has the following additional features: PARALLEL OUTPUT IS REGISTERED. The total number of IC chip bits is 8. The total number of pins is 16. The product should be used at temperatures below 85°C. Ideally, it should not fall below -40°C. This supply voltage is employed under 5.5V. This supply voltage is employed higher than 2V. 9 output lines are available for operation.
SN74LV594APWTE4 Features
With 16 pins
Operate supply voltage at 5V
With 9 output lines
SN74LV594APWTE4 Applications
There are a lot of Texas Instruments SN74LV594APWTE4 Shift Registers applications.
- Parallel to serial converter
- 7-segment display control
- data manipulation
- Remote control holding register
- Interconnectors
- Counter
- Output expansion
- Generate time delay toward digital circuits
- Data manipulation
- 8-bit data storage