SN74LV574ARGYR
| Parameters | |
|---|---|
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LV574 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 16mA |
| Number of Bits | 8 |
| Clock Frequency | 175MHz |
| Propagation Delay | 19.6 ns |
| Turn On Delay Time | 4.8 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 20μA |
| Current - Output High, Low | 16mA 16mA |
| Max Propagation Delay @ V, Max CL | 10.6ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 1.8pF |
| Power Supply Current-Max (ICC) | 0.02mA |
| Number of Input Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Max Frequency@Nom-Sup | 45000000Hz |
| Height | 1mm |
| Length | 4.5mm |
| Width | 3.5mm |
| Thickness | 900μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-VFQFN Exposed Pad |
| Number of Pins | 20 |
| Weight | 43.006227mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74LV |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
SN74LV574ARGYR Overview
It is embeded in 20-VFQFN Exposed Pad case. It is contained within the Cut Tape (CT)package. T flip flop is configured with an output of Tri-State, Non-Inverted. This trigger is configured to use Positive Edge. Surface Mountis in the way of this electric part. A voltage of 2V~5.5Vis required for its operation. It is at -40°C~85°C TAdegrees Celsius that the system is operating. D-Typeis the type of this D latch. JK flip flop belongs to the 74LVseries of FPGAs. There should be no greater frequency than 175MHzon its output. There are 1 elements in it. It consumes 20μA of quiescent Terminations are 20. This D latch belongs to the family of 74LV574. A voltage of 2.5V provides power to the D latch. Its input capacitance is 1.8pF farads. In this case, the D flip flop belongs to the LV/LV-A/LVX/Hfamily. It is mounted in the way of Surface Mount. It is designed with 20 pins. This device exhibits a clock edge trigger type of Positive Edge. It is included in FF/Latches. There are 8bits in its design. The maximal supply voltage (Vsup) reaches 5.5V. Normally, the supply voltage (Vsup) should be above 2V. To achieve this superior flexibility, 8 circuits are used. As a result of its reliable performance, this T flip flop is suitable for TR. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. With an output current of 16mA, it is possible to design the device in any way you want. Currently, there are 3 lines of input.
SN74LV574ARGYR Features
Cut Tape (CT) package
74LV series
20 pins
8 Bits
SN74LV574ARGYR Applications
There are a lot of Texas Instruments SN74LV574ARGYR Flip Flops applications.
- Storage Registers
- Shift registers
- Data Synchronizers
- ESD performance
- Single Down Count-Control Line
- Count Modes
- Cold spare funcion
- EMI reduction circuitry
- CMOS Process
- Counters