SN74LV4040ADGVR
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 41.900595mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74LV |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.4mm |
| Frequency | 185MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LV4040 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 28 ns |
| Reset | Asynchronous |
| Family | LV/LV-A/LVX/H |
| Logic Function | Counter |
| Direction | Up |
| Output Characteristics | 3-STATE |
| Logic Type | Binary Counter |
| Number of Bits per Element | 12 |
| Trigger Type | Negative Edge |
| Power Supply Current-Max (ICC) | 0.02mA |
| Clock Edge Trigger Type | Negative Edge |
| Count Rate | 95MHz |
| Height | 1.2mm |
| Length | 3.6mm |
| Width | 4.4mm |
| Thickness | 1.05mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LV4040ADGVR Overview
A 16-TFSOP (0.173, 4.40mm Width)package is used for this device. Using 16terminations, it can be configured. Having a supply voltage of 2.5V enables to operate in a fully flexible manner. A wire connects the 1elements. In total, there are 16pins on the component. There is a package in the form of Cut Tape (CT). Circuit components are connected with 16pins. It is mounted in the way of [0]. Initially, it appears to belong to the LV/LV-A/LVX/H family. Having been designed as a member of the 74LVseries, it is well suited for use in a wide range of applications. Binary Counteris adopted as the logic type. A temperature of -40°C~85°Cshould be set for the operating environment. In this case, it is mounted with a Surface Mounttype. As long as the supply voltage is set to [0], the device can operate with a greater degree of reliability. The array consists of elements storing 12bits each. Using the Pbfree code, the result may be yes. Under its base part number of [0], you will find additional related parts. The packing of the product is carried out by [0]. The voltage source generates 3.3Vvoltage. As low as 2V Vsup is the minimum supply voltage. It operates at a frequency of 185MHz Hz. Up to 5.5Vis the maximum supply voltage (Vsup).
SN74LV4040ADGVR Features
Embedded in the 16-TFSOP (0.173, 4.40mm Width) package
12 bits per element
Frequency of 185MHz
SN74LV4040ADGVR Applications
There are a lot of Texas Instruments SN74LV4040ADGVR Counters & Dividers applications.
- Communications Digital Frequency Synthesizers;
- Time delay circuits
- MULTIPLICATION
- Frequency division
- Control counters
- Programmable decade counters
- Decade counter/decimal decode display (CD4017B）
- SQUARE ROOT
- ANALOG SIGNAL PROCESSING
- Binary counter/decoder