SN74LV175ADG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Packing Method | TUBE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Frequency | 165MHz |
| Pin Count | 16 |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Load Capacitance | 50pF |
| Current - Output | 12mA |
| Propagation Delay | 23.3 ns |
| Turn On Delay Time | 3.7 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | D-Type, Flip-Flop |
| Logic IC Type | D FLIP-FLOP |
| Max I(ol) | 0.006 A |
| Number of Bits per Element | 4 |
| High Level Output Current | -12mA |
| Low Level Output Current | 12mA |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.58mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74LV175ADG4 Overview
The package is in the form of SOIC. In total, it contains 1 elements. There are 16 terminations,A voltage of 2.5V is used as the power supply for this D latch. Electronic devices of this type belong to the LV/LV-A/LVX/Hfamily. Surface Mount mounts this electronic component. A total of 16pins are provided on this board. This device has the clock edge trigger type of Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TUBE. The D latch operates on 3.3V volts. A -12mAvalue is set for the high level output current. 12mAis set as the low level output current. A temperature below 85°Cshould be used for operation. Ideally, the operating temperature should be greater than -40°C. It operates with the minimal supply voltage of 2V. 5.5Vis the maximum supply voltage it supports. We are able to achieve a frequency of 165MHz. The logic IC it adopts is D FLIP-FLOP. There are 1 functions available on the JK flip flop. The D latch is equipped with 16 pins. As a result of its output current of 12mA, it is very flexible in terms of design.
SN74LV175ADG4 Features
16 pins
3.3V power supplies
1 Functions
16 pin count
SN74LV175ADG4 Applications
There are a lot of Texas Instruments SN74LV175ADG4 Flip Flops applications.
- Bus hold
- ESD protection
- Memory
- Safety Clamp
- 2 – Bit synchronous counter
- Balanced 24 mA output drivers
- Computers
- Circuit Design
- Registers
- EMI reduction circuitry