SN74LV166APWE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 16 |
| Weight | 59.987591mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | SISO OPERATION ALSO AVAILABLE |
| Subcategory | Shift Registers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Number of Bits | 8 |
| Propagation Delay | 11.9 ns |
| Turn On Delay Time | 26 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | OR, Shift Register |
| Direction | Unidirectional |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN SERIAL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 9 |
| Max Frequency@Nom-Sup | 35000000Hz |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74LV166APWE4 Overview
The device is embedded in TSSOP package. 16 is the total number of terminations on the chip. This item is packed in case Rail/Tube. 2.5V is the operating supply voltage of the part. On this part, there are 1 elements. It is equipped with a pin count of 16. The recommended mounting method is Surface Mount. In this case, the electronic component belongs to the LV/LV-A/LVX/H. 5V is noted as the operating supply voltage of this chip. Please take note of the following additional aspects of this section: SISO OPERATION ALSO AVAILABLE. The device has a total of 9 input lines. Voltage can be delivered at 3.3V by the device. A total of 8 bits are present on an IC chip. 16 pins are on it. At temperatures below 85°C, it is recommended for use. For this device to operate, it cannot be lower than -40°C. Under 5.5V, this supply voltage is employed. It is used at a voltage greater than 2V. It belongs to the subcategory of Shift Registers.
SN74LV166APWE4 Features
With 16 pins
Operate supply voltage at 5V
It supplies 3.3V power
SN74LV166APWE4 Applications
There are a lot of Texas Instruments SN74LV166APWE4 Shift Registers applications.
- data manipulation
- Remote control holding register
- Serial-to-parallel data conversion
- Serial-to-parallel data conversion
- LED matrix control
- Serial to parallel converter
- Pseudo Random Pattern Generator
- temporary data storage
- Flash Memory
- 7-segment display control