SN74LV165ADBRE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SSOP |
| Number of Pins | 16 |
| Weight | 130.010913mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | SISO OPERATION ALSO AVAILABLE |
| Subcategory | Shift Registers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Pin Count | 16 |
| Number of Outputs | 2 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Number of Bits | 8 |
| Propagation Delay | 11.9 ns |
| Turn On Delay Time | 28 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | OR, Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | COMPLEMENTARY |
| Logic IC Type | PARALLEL IN SERIAL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 9 |
| fmax-Min | 45 MHz |
| Max Frequency@Nom-Sup | 50000000Hz |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74LV165ADBRE4 Overview
This device can be found embedded within the package SSOP. This chip has a total termination count of 16. There is a Tape and Reel case containing it. There is 2.5V operating supply voltage listed on the part. On this part, there are 1 elements. The device is equipped with 16 pins. Mounting by Surface Mount is recommended. There is an electronic component in the LV/LV-A/LVX/H. 5V is noted as the operating supply voltage of this chip. Additional aspects of this section are as follows: SISO OPERATION ALSO AVAILABLE. The device has a total of 9 input lines. Voltage can be delivered at 3.3V by the device. A total of 8 bits are present on the IC chip. 16 pins are present on it. This product should not be used at temperatures above 85°C. In order for this device to function, the value should not be less than -40°C. It is used under the 5.5V supply voltage. It is necessary to use a voltage that is higher than 2V to provide this supply. In its subcategory, it is listed under Shift Registers. 2 outputs are provided by the part.
SN74LV165ADBRE4 Features
With 16 pins
Operate supply voltage at 5V
It supplies 3.3V power
SN74LV165ADBRE4 Applications
There are a lot of Texas Instruments SN74LV165ADBRE4 Shift Registers applications.
- Pattern Recognizers
- Pulse Extenders
- Flash Memory
- ROM Chips
- Parallel to serial converter
- Delay Line
- LED matrix control
- Sequence generator
- data manipulation
- store data in digital form