SN74LV164APWRE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 14 |
| Weight | 59.987591mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 14 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | AND-GATED SERIAL INPUTS (A AND B) |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Pin Count | 14 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Propagation Delay | 11 ns |
| Turn On Delay Time | 24 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 2 |
| Max Frequency@Nom-Sup | 45000000Hz |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74LV164APWRE4 Overview
TSSOP package contains the device. 14 is the sum of the number of terminations in the chip. A Tape and Reel case is used to pack it. There is 2.5V operating supply voltage listed on the part. On this part, there are 1 elements. In this device, there are 14 pins. It is recommended to mount by Surface Mount. Electronic components belong to the LV/LV-A/LVX/H group. In terms of supply voltage, this chip operates within the range of 5V. Please take note of the following additional aspects of this section: AND-GATED SERIAL INPUTS (A AND B). 2 input lines are available on the device. Voltage can be delivered at 3.3V by the device. 14 pins are present on it. At temperatures below 85°C, it is recommended for use. In order for this device to function, the value should not be less than -40°C. It is employed under the condition of 5.5V. This supply voltage is employed higher than 2V.
SN74LV164APWRE4 Features
With 14 pins
Operate supply voltage at 5V
It supplies 3.3V power
SN74LV164APWRE4 Applications
There are a lot of Texas Instruments SN74LV164APWRE4 Shift Registers applications.
- 7-segment display control
- Output expansion
- LED matrix control
- Interconnectors
- store data in digital form
- Delay Line
- 8-bit data storage
- Pulse Extenders
- temporary data storage
- Sequence generator