SN74LV164APWE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 14 |
| Weight | 59.987591mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 14 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | AND-GATED SERIAL INPUTS (A AND B) |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Pin Count | 14 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Propagation Delay | 11 ns |
| Turn On Delay Time | 24 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 2 |
| Max Frequency@Nom-Sup | 45000000Hz |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74LV164APWE4 Overview
There is an embedded device in the package TSSOP. It sums up to 14 where the chip's terminations add up. This item is packed in case Rail/Tube. The part operates at 2.5V voltage. It is a part that has 1 elements on it. It is equipped with a pin count of 14. It is recommended that the mount should be done by Surface Mount. Electronic components fall under the category of LV/LV-A/LVX/H. In terms of supply voltage, this chip operates within the range of 5V. Additionally, this section contains the following: AND-GATED SERIAL INPUTS (A AND B). This device has 2 input lines available. A voltage of 3.3V can be delivered by it. The total number of pins is 14. A temperature below 85°C is recommended for its use. In order for this device to function, the value should not be less than -40°C. We use this supply voltage under 5.5V. There is a voltage applied to the supply that is greater than 2V.
SN74LV164APWE4 Features
With 14 pins
Operate supply voltage at 5V
It supplies 3.3V power
SN74LV164APWE4 Applications
There are a lot of Texas Instruments SN74LV164APWE4 Shift Registers applications.
- LED matrix control
- Output expansion
- Serial to parallel converter
- ROM Chips
- Parallel data
- temporary data storage
- Delay Line
- 8-bit data storage
- data manipulation
- Generate time delay toward digital circuits