SN74LV164ADRE4
| Parameters | |
|---|---|
| Number of Elements | 1 |
| Power Supplies | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Propagation Delay | 11 ns |
| Turn On Delay Time | 24 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 2 |
| Max Frequency@Nom-Sup | 45000000Hz |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 14 |
| Weight | 130.010913mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 14 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | AND-GATED SERIAL INPUTS (A AND B) |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Pin Count | 14 |
| Operating Supply Voltage | 5V |
SN74LV164ADRE4 Overview
This device can be found embedded within the package SOIC. 14 is the number of terminations on the chip. A Tape and Reel case is used to pack it. There is 2.5V operating supply voltage listed on the part. A total of 1 elements can be found on this part. In this device, there are 14 pins. Mounting by Surface Mount is recommended. An electronic component is included in the LV/LV-A/LVX/H. As noted, this chip operates within the range of 5V. There are also the following additional considerations in this section: AND-GATED SERIAL INPUTS (A AND B). As far as the device is concerned, there are 2 input lines available. There is a capability to deliver voltage at 3.3V. There are a total of 14 pins on it. At temperatures below 85°C, it is recommended for use. In order for this device to function, the value should not be less than -40°C. A voltage of 5.5V is employed as the supply voltage. A voltage higher than 2V is used as a supply voltage.
SN74LV164ADRE4 Features
With 14 pins
Operate supply voltage at 5V
It supplies 3.3V power
SN74LV164ADRE4 Applications
There are a lot of Texas Instruments SN74LV164ADRE4 Shift Registers applications.
- 7-segment display control
- Counter
- store data in digital form
- Dual-rank shift, hold, and bus applications
- Parallel data
- Output expansion
- Serial-to-parallel data conversion
- Cache memory in CPU
- temporary data storage
- Data Format Converters