SN74LV164ADGVRE4
| Parameters | |
|---|---|
| Pin Count | 14 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Propagation Delay | 11 ns |
| Turn On Delay Time | 24 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 2 |
| Max Frequency@Nom-Sup | 45000000Hz |
| Length | 4.4mm |
| Width | 3.6mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Package / Case | TFSOP |
| Number of Pins | 14 |
| Weight | 40.001177mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 14 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | AND-GATED SERIAL INPUTS (A AND B) |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.4mm |
SN74LV164ADGVRE4 Overview
Embedded in a package of type TFSOP, the device is available for use. It sums up to 14 where the chip's terminations add up. A Tape and Reel case holds it. This part has an operating supply voltage of 2.5V. It is a part that has 1 elements on it. The device is equipped with 14 pins. Using Surface Mount as a mount point is recommended. In the LV/LV-A/LVX/H series, the electronic component belongs. As noted, this chip operates within the range of 5V. There are also the following additional considerations in this section: AND-GATED SERIAL INPUTS (A AND B). The device has 2 input lines. Voltage can be delivered at 3.3V. 14 pins are on it. Temperatures below 85°C are recommended for use. Ideally, it should not fall below -40°C. It is employed under the condition of 5.5V. Voltages higher than 2V are used for this supply.
SN74LV164ADGVRE4 Features
With 14 pins
Operate supply voltage at 5V
It supplies 3.3V power
SN74LV164ADGVRE4 Applications
There are a lot of Texas Instruments SN74LV164ADGVRE4 Shift Registers applications.
- LED matrix control
- Delay Line
- Data Format Converters
- Data manipulation
- Serial-to-parallel data conversion
- 8-bit data storage
- Pulse Extenders
- store data in digital form
- Generate time delay toward digital circuits
- 7-segment display control