SN74LV164ADG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 14 |
| Weight | 130.010913mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 14 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Additional Feature | AND-GATED SERIAL INPUTS (A AND B) |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Pin Count | 14 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 3.3V |
| Temperature Grade | AUTOMOTIVE |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Propagation Delay | 11 ns |
| Turn On Delay Time | 24 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 2 |
| Max Frequency@Nom-Sup | 45000000Hz |
| Height | 1.58mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74LV164ADG4 Overview
Embedded in a package of type SOIC, the device is available for use. 14 is the total number of terminations on the chip. 2.5V is the part's operating supply voltage. This part has 1 elements. The device is equipped with 14 pins. It is recommended to mount by Surface Mount. The electronic component belongs to the LV/LV-A/LVX/H. It's noted that the chip's operating supply voltage is in the range 5V. Additional aspects of this section are as follows: AND-GATED SERIAL INPUTS (A AND B). In the device, there are 2 input lines. Voltage can be delivered at 3.3V by the device. The pin count is 14. A temperature below 125°C is recommended for its use. It should not be less than -40°C when operating this device. It is used under the 5.5V supply voltage. It is used at a voltage greater than 2V.
SN74LV164ADG4 Features
With 14 pins
Operate supply voltage at 5V
It supplies 3.3V power
SN74LV164ADG4 Applications
There are a lot of Texas Instruments SN74LV164ADG4 Shift Registers applications.
- Counter
- Serial-to-parallel data conversion
- Serial to parallel converter
- 8-bit data storage
- Dual-rank shift, hold, and bus applications
- Generate time delay toward digital circuits
- Remote control holding register
- Cache memory in CPU
- Data manipulation
- 7-segment display control