SN74LV164ADBRE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SSOP |
| Number of Pins | 14 |
| Weight | 120.003531mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 14 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | AND-GATED SERIAL INPUTS (A AND B) |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Pin Count | 14 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Propagation Delay | 11 ns |
| Turn On Delay Time | 24 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 2 |
| Max Frequency@Nom-Sup | 45000000Hz |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74LV164ADBRE4 Overview
There is a SSOP package embedded with the device. This chip has a total termination count of 14. Tape and Reel is the case in which it is packed. Parts with a 2.5V operating supply voltage are specified. The part consists of 1 elements. 14 pins are provided on the device. It is recommended to mount by Surface Mount in order to get the best results. There is an electronic component in the LV/LV-A/LVX/H. 5V is noted as the operating supply voltage of this chip. The following additional elements are important to note: AND-GATED SERIAL INPUTS (A AND B). A device with 2 input lines is available. Voltage can be delivered at 3.3V by the device. 14 pins are present on it. Under temperatures below 85°C, it is recommended to use it. This device should not be operated below -40°C. A voltage of 5.5V is employed as the supply voltage. This supply voltage is employed higher than 2V.
SN74LV164ADBRE4 Features
With 14 pins
Operate supply voltage at 5V
It supplies 3.3V power
SN74LV164ADBRE4 Applications
There are a lot of Texas Instruments SN74LV164ADBRE4 Shift Registers applications.
- Pattern Recognizers
- Remote control holding register
- Pseudo Random Pattern Generator
- 7-segment display control
- ROM Chips
- Data manipulation
- Dual-rank shift, hold, and bus applications
- Cache memory in CPU
- Sequence generator
- Parallel data