SN74LS96DR
| Parameters | |
|---|---|
| Package / Case | SOIC |
| Surface Mount | YES |
| Pbfree Code | no |
| Number of Terminations | 16 |
| Additional Feature | CLEAR FOLLOWED BY SELECTIVE PRESET IMITATES LOAD |
| HTS Code | 8542.39.00.01 |
| Subcategory | Shift Registers |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 70°C |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Supply Voltage-Min (Vsup) | 4.75V |
| Load Capacitance | 15pF |
| Number of Bits | 5 |
| Family | LS |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Propagation Delay (tpd) | 40 ns |
| Power Supply Current-Max (ICC) | 20mA |
| fmax-Min | 25 MHz |
| Count Direction | RIGHT |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
SN74LS96DR Overview
As a result, SOIC package contains the embedded device. 16 is the number of terminations on the chip. A voltage of 5V is specified for the part's operating supply. In the LS series, the electronic component belongs. Taking note of the following additional details: CLEAR FOLLOWED BY SELECTIVE PRESET IMITATES LOAD. This part must have a minimum supply voltage (Vsup) of 4.75V. Voltage can be delivered at 5V by the device. This part requires a maximum supply voltage (Vsup) of 5.25V. IC chip bits total 5. 16 pins are on it. It belongs to the subcategory of Shift Registers. You should not use it above 70°C.
SN74LS96DR Features
It supplies 5V power
SN74LS96DR Applications
There are a lot of Texas Instruments SN74LS96DR Shift Registers applications.
- Interconnectors
- Sequence generator
- Dual-rank shift, hold, and bus applications
- Data Format Converters
- Pseudo Random Pattern Generator
- Data manipulation
- Flash Memory
- Parallel to serial converter
- Remote control holding register
- Remote control holding register