SN74LS95BDR
| Parameters | |
|---|---|
| Package / Case | SOIC |
| Surface Mount | YES |
| Pbfree Code | no |
| Number of Terminations | 14 |
| Additional Feature | SEPARATE CLOCKS FOR SHIFT RIGHT & LOAD |
| HTS Code | 8542.39.00.01 |
| Subcategory | Shift Registers |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 14 |
| JESD-30 Code | R-PDSO-G14 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 70°C |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Supply Voltage-Min (Vsup) | 4.75V |
| Load Capacitance | 15pF |
| Number of Bits | 4 |
| Family | LS |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Trigger Type | NEGATIVE EDGE |
| Propagation Delay (tpd) | 32 ns |
| Power Supply Current-Max (ICC) | 21mA |
| fmax-Min | 36 MHz |
| Count Direction | RIGHT |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
SN74LS95BDR Overview
There is an embedded device in the package SOIC. A total of 14 terminations can be found on the chip. 5V is the part's operating supply voltage. Electronic components are categorized as LS. There are also the following additional considerations in this section: SEPARATE CLOCKS FOR SHIFT RIGHT & LOAD. The minimum supply voltage (Vsup) for this part should not be less than 4.75V. There is a possibility of delivering voltage at 5V. This part requires a maximum supply voltage (Vsup) of 5.25V. The total number of IC chip bits is 4. It has a total of zero pins. It belongs to the subcategory of Shift Registers. You should not use it above 70°C.
SN74LS95BDR Features
It supplies 5V power
SN74LS95BDR Applications
There are a lot of Texas Instruments SN74LS95BDR Shift Registers applications.
- Pulse Extenders
- ROM Chips
- 8-bit data storage
- Parallel to serial converter
- Remote control holding register
- store data in digital form
- Dual-rank shift, hold, and bus applications
- LED matrix control
- Pattern Recognizers
- Pseudo Random Pattern Generator