SN74LS95BD
| Parameters | |
|---|---|
| Package / Case | SOIC |
| Surface Mount | YES |
| Pbfree Code | no |
| Number of Terminations | 14 |
| Additional Feature | SEPARATE CLOCKS FOR SHIFT RIGHT & LOAD |
| HTS Code | 8542.39.00.01 |
| Subcategory | Shift Registers |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 14 |
| JESD-30 Code | R-PDSO-G14 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 70°C |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Supply Voltage-Min (Vsup) | 4.75V |
| Load Capacitance | 15pF |
| Number of Bits | 4 |
| Family | LS |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Trigger Type | NEGATIVE EDGE |
| Propagation Delay (tpd) | 32 ns |
| Power Supply Current-Max (ICC) | 21mA |
| fmax-Min | 36 MHz |
| Count Direction | RIGHT |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
SN74LS95BD Overview
This device can be found embedded within the package SOIC. 14 is the total number of terminations on the chip. The part's operating supply voltage is rated 5V. An electronic component is included in the LS. The following additional elements are important to note: SEPARATE CLOCKS FOR SHIFT RIGHT & LOAD. The minimum supply voltage (Vsup) for this part should not be less than 4.75V. A device capable of delivering voltage at 5V can be used. A maximum supply voltage (Vsup) of 5.25V may be applied to this part. IC chips contain a total of 4 bits. It has a total of 14 pins. The subcategory in which it falls belongs to is Shift Registers. No temperature higher than 70°C should be used.
SN74LS95BD Features
It supplies 5V power
SN74LS95BD Applications
There are a lot of Texas Instruments SN74LS95BD Shift Registers applications.
- Dual-rank shift, hold, and bus applications
- Remote control holding register
- Serial-to-parallel data conversion
- LED matrix control
- store data in digital form
- Delay Line
- Generate time delay toward digital circuits
- Flash Memory
- Cache memory in CPU
- Output expansion