SN74LS91N
| Parameters | |
|---|---|
| Package / Case | PDIP |
| Surface Mount | NO |
| Pbfree Code | no |
| Number of Terminations | 14 |
| HTS Code | 8542.39.00.01 |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | THROUGH-HOLE |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 70°C |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Supply Voltage-Min (Vsup) | 4.75V |
| Load Capacitance | 15pF |
| Number of Bits | 8 |
| Family | LS |
| Logic Function | Shift Register |
| Output Polarity | COMPLEMENTARY |
| Logic IC Type | SERIAL IN SERIAL OUT |
| Trigger Type | POSITIVE EDGE |
| Propagation Delay (tpd) | 40 ns |
| Power Supply Current-Max (ICC) | 20mA |
| fmax-Min | 10 MHz |
| Count Direction | RIGHT |
| Max Frequency@Nom-Sup | 10000000Hz |
| Height Seated (Max) | 5.08mm |
| Length | 19.305mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
SN74LS91N Overview
As a result, PDIP package contains the embedded device. 14 is the number of terminations on the chip. A voltage of 5V is specified for the part's operating supply. Electronic components are categorized as LS. This part should have a minimum supply voltage (Vsup) of at least 4.75V. The device is capable of delivering voltage at 5V. In this part, the maximum supply voltage (Vsup) should not exceed 5.25V. It has a total of 8 pins. Use it only at temperatures below 70°C.
SN74LS91N Features
It supplies 5V power
SN74LS91N Applications
There are a lot of Texas Instruments SN74LS91N Shift Registers applications.
- Data Processors
- Data Format Converters
- Remote control holding register
- Remote control holding register
- Serial-to-parallel data conversion
- 7-segment display control
- 8-bit data storage
- data transfer
- Output expansion
- Serial to parallel converter