SN74LS73ADE4
| Parameters | |
|---|---|
| Number of Terminations | 14 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FF/Latches |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Frequency | 45MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Output Type | TTL |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Current - Output | 8mA |
| Number of Bits | 2 |
| Propagation Delay | 20 ns |
| Turn On Delay Time | 15 ns |
| Family | LS |
| Logic Function | Flip-Flop |
| Output Characteristics | TOTEM POLE |
| High Level Output Current | -400μA |
| Low Level Output Current | 8mA |
| Power Supply Current-Max (ICC) | 6mA |
| Number of Input Lines | 3 |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Negative Edge |
| Length | 8.65mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
SN74LS73ADE4 Overview
It is packaged in the way of SOIC. T flip flop uses TTLas its output configuration. D latch consists of 2 elements. A total of 14 terminations have been made. Power is provided by a 5V supply. The electronic device belongs to the LSfamily. Electronic part Surface Mountis mounted in the way. There are 14pins on it. A Negative Edgeclock edge trigger is used in this device. The part is included in FF/Latches. The design is based on 2bits. There are 5V power supplies attached to it. For high efficiency, the supply voltage should be kept at 5V. It operates with 1 output lines. Currently, there are 3 lines of input. -400μAis set as the high level output current. 8mA is the low level output current. A temperature below 70°Cis recommended for operation. Ideally, the operating temperature should be greater than 0°C. The RS flip flop is designed to operate with a minimal supply voltage of 4.75VV. In this case, it supports a maximum supply voltage of 5.25V. This frequency can be achieved 45MHz. It is equipped with 2 functions . With 14 pins, it is equipped with a low power consumption. The 8mA output current allows it to be designed with the greatest amount of flexibility.
SN74LS73ADE4 Features
14 pins
2 Bits
5V power supplies
2 Functions
14 pin count
SN74LS73ADE4 Applications
There are a lot of Texas Instruments SN74LS73ADE4 Flip Flops applications.
- Pattern generators
- Shift registers
- Test & Measurement
- CMOS Process
- Power down protection
- ESD protection
- ATE
- Control circuits
- Single Up Count-Control Line
- QML qualified product