SN74LS673DWG4
| Parameters | |
|---|---|
| Min Supply Voltage | 4.75V |
| Number of Bits | 16 |
| Propagation Delay | 40 ns |
| Turn On Delay Time | 45 ns |
| Family | LS |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Trigger Type | NEGATIVE EDGE |
| Number of Output Lines | 17 |
| fmax-Min | 28 MHz |
| Max Frequency@Nom-Sup | 20000000Hz |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 24 |
| Weight | 620.004071mg |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 24 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 24 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
SN74LS673DWG4 Overview
Embedded in a package of type SOIC, the device is available for use. A total of 24 terminations can be found on the chip. A voltage of 5V is specified for the part's operating supply. There are 1 elements on this part. It is equipped with a pin count of 24. It is recommended that the mount should be done by Surface Mount. There is an electronic component in the LS. The operating supply voltage of this chip is noted to be within the range 5V. A device capable of delivering voltage at 5V can be used. There are 16 bits on the IC chip. 24 pins are present on it. It is recommended that it be used at temperatures below 70°C. For this device to work, it should not go below 0°C. It is used under the 5.25V supply voltage. It is used at a voltage greater than 4.75V. Operating on 17 output lines is possible.
SN74LS673DWG4 Features
With 24 pins
Operate supply voltage at 5V
It supplies 5V power
With 17 output lines
SN74LS673DWG4 Applications
There are a lot of Texas Instruments SN74LS673DWG4 Shift Registers applications.
- Serial-to-parallel data conversion
- 8-bit data storage
- Cache memory in CPU
- Sequence generator
- Remote control holding register
- Pseudo Random Pattern Generator
- Pulse Extenders
- Generate time delay toward digital circuits
- Output expansion
- Counter