SN74LS599N
| Parameters | |
|---|---|
| Package / Case | PDIP |
| Surface Mount | NO |
| Pbfree Code | no |
| Number of Terminations | 16 |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED; ASYNCHRONOUS CLEAR FOR STORAGE REGISTER |
| HTS Code | 8542.39.00.01 |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | THROUGH-HOLE |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 70°C |
| Supply Voltage-Max (Vsup) | 5.25V |
| Temperature Grade | COMMERCIAL |
| Supply Voltage-Min (Vsup) | 4.75V |
| Load Capacitance | 30pF |
| Number of Bits | 8 |
| Family | LS |
| Logic Function | Shift Register |
| Output Characteristics | OPEN-COLLECTOR |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Propagation Delay (tpd) | 25 ns |
| Power Supply Current-Max (ICC) | 55mA |
| fmax-Min | 20 MHz |
| Count Direction | RIGHT |
| Height Seated (Max) | 5.08mm |
| Length | 19.305mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
SN74LS599N Overview
This device can be found embedded within the package PDIP. 16 is the number of terminations on the chip. Its operating supply voltage is rated at 5V. An electronic component is included in the LS. Taking note of the following additional details: PARALLEL OUTPUT IS REGISTERED; ASYNCHRONOUS CLEAR FOR STORAGE REGISTER. For this part, the minimum supply voltage (Vsup) should not be less than 4.75V. It is recommended that the maximum supply voltage for this part is not greater than 5.25V (Vsup). The total number of IC chip bits is 8. This board has 16 pins in total. It should only be used at temperatures no greater than 70°C.
SN74LS599N Features
SN74LS599N Applications
There are a lot of Texas Instruments SN74LS599N Shift Registers applications.
- Data Processors
- LED matrix control
- Serial-to-parallel data conversion
- Remote control holding register
- Data Format Converters
- store data in digital form
- Serial to parallel converter
- Pattern Recognizers
- 8-bit data storage
- Flash Memory