SN74LS597NSRG4
| Parameters | |
|---|---|
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | SISO OPERATION ALSO AVAILABLE |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of Bits | 8 |
| Propagation Delay | 60 ns |
| Turn On Delay Time | 60 ns |
| Family | LS |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN SERIAL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 9 |
| fmax-Min | 20 MHz |
| Max Frequency@Nom-Sup | 20000000Hz |
| Height Seated (Max) | 2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Package / Case | SOP |
| Number of Pins | 16 |
| Weight | 200.686274mg |
SN74LS597NSRG4 Overview
In package SOP, there is an embedded device. 16 is the sum of the number of terminations in the chip. The Tape & Reel (TR) case contains it. 5V is the part's operating supply voltage. 1 elements are present in this part. 16 pins are provided on the device. Using Surface Mount as a mount point is recommended. Electronic components are categorized as LS. It is noted that the operating supply voltage of this chip falls within the range 5V. The following additional elements are important to note: SISO OPERATION ALSO AVAILABLE. A device with 9 input lines is available. A voltage of 5V is possible with this device. A total of 8 bits are present on an IC chip. This board has 16 pins in total. It is recommended that it be used at temperatures below 70°C. It should not be less than 0°C when operating this device. 5.25V is the supply voltage used. This supply voltage is employed higher than 4.75V.
SN74LS597NSRG4 Features
With 16 pins
Operate supply voltage at 5V
It supplies 5V power
SN74LS597NSRG4 Applications
There are a lot of Texas Instruments SN74LS597NSRG4 Shift Registers applications.
- Serial to parallel converter
- Counter
- 8-bit data storage
- Interconnectors
- Remote control holding register
- Parallel to serial converter
- Serial-to-parallel data conversion
- Generate time delay toward digital circuits
- Remote control holding register
- Delay Line