SN74LS597DG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 139.989945mg |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | SISO OPERATION ALSO AVAILABLE |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of Bits | 8 |
| Propagation Delay | 60 ns |
| Turn On Delay Time | 60 ns |
| Family | LS |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN SERIAL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 9 |
| fmax-Min | 20 MHz |
| Max Frequency@Nom-Sup | 20000000Hz |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74LS597DG4 Overview
In package SOIC, there is an embedded device. 16 is the number of terminations on the chip. 5V is the operating supply voltage of the part. The part consists of 1 elements. 16 pins are present on the device. The mounting method should be Surface Mount. In the LS series, the electronic component belongs. The operating supply voltage of this chip is noted to be within the range 5V. Please take note of the following additional aspects of this section: SISO OPERATION ALSO AVAILABLE. The device has a total of 9 input lines. There is a capability to deliver voltage at 5V. A total of 8 bits are present on the IC chip. The total number of pins is 16. The product should be used at temperatures below 70°C. It should not be less than 0°C when operating this device. We use this supply voltage under 5.25V. It is important to note that this supply voltage is higher than 4.75V.
SN74LS597DG4 Features
With 16 pins
Operate supply voltage at 5V
It supplies 5V power
SN74LS597DG4 Applications
There are a lot of Texas Instruments SN74LS597DG4 Shift Registers applications.
- Serial to parallel converter
- Remote control holding register
- 8-bit data storage
- Serial-to-parallel data conversion
- Flash Memory
- LED matrix control
- Sequence generator
- Dual-rank shift, hold, and bus applications
- data transfer
- Delay Line