SN74LS595NE4
| Parameters | |
|---|---|
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT |
| Technology | TTL |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Load Capacitance | 30pF |
| Number of Bits | 8 |
| Propagation Delay | 35 ns |
| Turn On Delay Time | 38 ns |
| Family | LS |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Power Supply Current-Max (ICC) | 65mA |
| Number of Output Lines | 9 |
| fmax-Min | 20 MHz |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74LS595NE4 Overview
The device is embedded in PDIP package. Chip terminations add up to 16. A Rail/Tube case holds it. A voltage of 5V is specified for the part's operating supply. 1 elements make up this part. It has 16 pins. The recommended mounting method is Through Hole. It is a component of the LS. It is noted that the operating supply voltage of this chip falls within the range 5V. Additional aspects of this section include: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT. There is a possibility of delivering voltage at 5V. A total of 8 bits are present on the IC chip. 16 pins are present on it. Temperatures below 70°C are recommended for use. Operation of this device requires a value greater than 0°C. Under 5.25V, this supply voltage is employed. It is necessary to use a voltage that is higher than 4.75V to provide this supply. It is necessary to operate 9 output lines.
SN74LS595NE4 Features
With 16 pins
Operate supply voltage at 5V
It supplies 5V power
With 9 output lines
SN74LS595NE4 Applications
There are a lot of Texas Instruments SN74LS595NE4 Shift Registers applications.
- Output expansion
- Serial-to-parallel data conversion
- LED matrix control
- Pseudo Random Pattern Generator
- 7-segment display control
- Sequence generator
- Pattern Recognizers
- temporary data storage
- 8-bit data storage
- Data Format Converters