SN74LS595N3
| Parameters | |
|---|---|
| Package / Case | PDIP |
| Surface Mount | NO |
| Number of Pins | 16 |
| Pbfree Code | no |
| Number of Terminations | 16 |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED |
| HTS Code | 8542.39.00.01 |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | THROUGH-HOLE |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 70°C |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Supply Voltage-Min (Vsup) | 4.75V |
| Load Capacitance | 30pF |
| Number of Bits | 8 |
| Family | LS |
| Logic Function | Shift Register |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Propagation Delay (tpd) | 25 ns |
| Power Supply Current-Max (ICC) | 65mA |
| fmax-Min | 20 MHz |
| Count Direction | RIGHT |
| Height Seated (Max) | 5.08mm |
| Length | 19.305mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
SN74LS595N3 Overview
The device is embedded in PDIP package. 16 is the total number of terminations on the chip. Parts with a 5V operating supply voltage are specified. Devices with 16 pins are available. Electronic components are categorized as LS. Additional aspects of this section include: PARALLEL OUTPUT IS REGISTERED. This part must have a minimum supply voltage (Vsup) of 4.75V. A device capable of delivering voltage at 5V can be used. It is recommended that the maximum supply voltage for this part is not greater than 5.25V (Vsup). A total of 8 bits are present on the IC chip. It has a total of 16 pins. It should only be used at temperatures no greater than 70°C.
SN74LS595N3 Features
With 16 pins
It supplies 5V power
SN74LS595N3 Applications
There are a lot of Texas Instruments SN74LS595N3 Shift Registers applications.
- Remote control holding register
- Serial to parallel converter
- Parallel to serial converter
- Data Format Converters
- LED matrix control
- store data in digital form
- temporary data storage
- Flash Memory
- Output expansion
- data manipulation