SN74LS595DE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | SERIAL OUTPUT PIN FOR CASCADING |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of Bits | 8 |
| Propagation Delay | 35 ns |
| Turn On Delay Time | 38 ns |
| Family | LS |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Output Polarity | TRUE |
| Logic IC Type | SERIAL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Output Lines | 9 |
| fmax-Min | 20 MHz |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74LS595DE4 Overview
In package SOIC, there is an embedded device. Taking the total number of terminations on the chip and adding them up, we get 16. It is packed in a case number Rail/Tube. 5V is the operating supply voltage of the part. This part has 1 elements. 16 pins are available on the device. It is recommended to mount by Surface Mount in order to get the best results. There is an electronic component in the LS. The operating supply voltage of this chip is noted to be within the range 5V. There are also the following additional considerations in this section: SERIAL OUTPUT PIN FOR CASCADING. It can deliver voltage at 5V. It has a total of 8 pins. The pin count is 16. It should be used below 70°C. For this device to operate, it cannot be lower than 0°C. A voltage of this type is employed under 5.25V. It is necessary to use a voltage that is higher than 4.75V to provide this supply. 9 output lines are available for operation.
SN74LS595DE4 Features
With 16 pins
Operate supply voltage at 5V
It supplies 5V power
With 9 output lines
SN74LS595DE4 Applications
There are a lot of Texas Instruments SN74LS595DE4 Shift Registers applications.
- Counter
- Interconnectors
- Remote control holding register
- Serial to parallel converter
- Flash Memory
- temporary data storage
- data manipulation
- Parallel to serial converter
- store data in digital form
- Pseudo Random Pattern Generator