SN74LS594NSRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LS |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Technology | TTL |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LS594 |
| Function | Serial to Parallel |
| Qualification Status | Not Qualified |
| Output Type | Push-Pull |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Propagation Delay | 30 ns |
| Family | LS |
| Logic Function | Shift Register |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 1 |
| Number of Output Lines | 9 |
| fmax-Min | 20 MHz |
| Count Direction | RIGHT |
| Height Seated (Max) | 2mm |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
SN74LS594NSRG4 Overview
16-SOIC (0.209, 5.30mm Width) package contains the device. 16 is the number of terminations on the chip. It is used to pack in Tape & Reel (TR) case. 5V is the operating supply voltage of the part. Devices with 16 pins are available. It is recommended that the mount should be done by Surface Mount. Electronic components are categorized as LS. Mounted in the same way as Surface Mount. The operating temperature ranges 0°C~70°C. The voltage supplied to it is within the range of 4.75V~5.25V. In the 74LS series, this electrical component is found. Search for similar parts based on the 74LS594 family. For this part, Vsup should not be less than 4.75V. The device has 1 input lines. A voltage of 5V can be delivered by it. It is recommended that the maximum supply voltage for this part is not greater than 5.25V (Vsup). It is necessary to operate 9 output lines.
SN74LS594NSRG4 Features
With 16 pins
Mounted in Surface Mount type.
Based on 74LS594 family
It supplies 5V power
With 9 output lines
SN74LS594NSRG4 Applications
There are a lot of Texas Instruments SN74LS594NSRG4 Shift Registers applications.
- Dual-rank shift, hold, and bus applications
- Remote control holding register
- Pulse Extenders
- Data manipulation
- Serial-to-parallel data conversion
- Delay Line
- Flash Memory
- Serial to parallel converter
- Parallel to serial converter
- Pattern Recognizers