SN74LS590NE4
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | 74LS |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Additional Feature | TCO OUTPUT; REGISTERED OUTPUTS |
| Technology | TTL |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| Qualification Status | COMMERCIAL |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.25V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Reset | Asynchronous |
| Family | LS |
| Direction | Up |
| Output Characteristics | 3-STATE |
| Logic Type | Binary Counter |
| Number of Bits per Element | 8 |
| Trigger Type | Positive Edge |
| Propagation Delay (tpd) | 33 ns |
| fmax-Min | 35 MHz |
| Count Rate | 35MHz |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
SN74LS590NE4 Overview
A device of this type is supplied in a package of type [0]. There are 16 terminations used for its configuration. With a supply voltage of 5V volts, it is possible to run it in a fully flexible manner. In wires, 1elements are connected. 16is the number of pins on all components. There is a package in the form of Tube. It is a member of the family [0]. Having been designed as a member of the 74LSseries, it is well suited for use in a wide range of applications. It is decided to use the logic type [0]. It is recommended that the operating temperature be set to 0°C~70°C. Mounting type Through Holeis used. As long as the supply voltage is set to [0], the device can operate with a greater degree of reliability. It contains 8elements. In terms of Pbfree code, the result may be no. An important feature of this electronic device is [0]. There is 4.75V minimum supply voltage (Vsup) for this device. A maximum supply voltage (Vsup) is available up to 5.25V.
SN74LS590NE4 Features
Embedded in the 16-DIP (0.300, 7.62mm) package
8 bits per element
TCO OUTPUT; REGISTERED OUTPUTS
SN74LS590NE4 Applications
There are a lot of Rochester Electronics, LLC SN74LS590NE4 Counters & Dividers applications.
- Frequency division
- Fixed and programmable counters greater than 10
- Fixed and programmable divide-by-10,9,8,7,6,5,4,3,2 counters
- Time-delay circuits
- VHF, UHF, FM, AM, etc.
- Counter control/timers
- Divide-by-N counting
- Digital multiplexing and demultiplexing
- Timing applications
- TRUE RMS-TO-DC CONVERSION