SN74LS393J
| Parameters | |
|---|---|
| Package / Case | CDIP |
| Surface Mount | NO |
| Number of Pins | 14 |
| Pbfree Code | no |
| Number of Terminations | 14 |
| Additional Feature | DIVIDE BY 2 AND DIVIDE BY 5 FUNCTIONS |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | THROUGH-HOLE |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 70°C |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Load Capacitance | 15pF |
| Number of Bits | 4 |
| Family | LS |
| Logic Function | Counter |
| Trigger Type | NEGATIVE EDGE |
| Propagation Delay (tpd) | 60 ns |
| Power Supply Current-Max (ICC) | 26mA |
| fmax-Min | 25 MHz |
| Count Direction | UP |
| Load/Preset Input | NO |
| Mode of Operation | ASYNCHRONOUS |
| Height Seated (Max) | 5.08mm |
| Length | 19.56mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
SN74LS393J Overview
The device is packaged in the CDIPtype. For its configuration, 14terminations are used. By supplying 5Vwith a voltage of 5V , the device can be operated in a completely flexible manner. The total number of component pins is 14. To connect the circuit's other components, there are 14pins. It is a member of the family [0]. The are 4 bits information in the device. The result may be noin terms of Pbfree code. These electronic devices have many important features, and DIVIDE BY 2 AND DIVIDE BY 5 FUNCTIONSis one of them. This device is manufactured in the temperature grade of COMMERCIAL. As a result of the voltage source, there is 5V voltage. Typically, the supply voltage (Vsup) is limited to 5.25V. Temperatures above 70°Care considered to be the maximum operating temperature.
SN74LS393J Features
Embedded in the CDIP package
DIVIDE BY 2 AND DIVIDE BY 5 FUNCTIONS
SN74LS393J Applications
There are a lot of Texas Instruments SN74LS393J Counters & Dividers applications.
- Up Counters
- Dual Up Counters
- Timing applications
- TRUE RMS-TO-DC CONVERSION
- Binary counter/decoder
- VHF, UHF, FM, AM, etc.
- Time-delay circuits
- Frequency division
- ANALOG SIGNAL PROCESSING
- Programmable decade counters