SN74LS283NE4
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | FULL ADDER; WITH INTERNAL CARRY LOOKAHEAD; PERMITS RIPPLE CARRY CASCADING |
| Subcategory | Arithmetic Circuits |
| Technology | TTL |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Channels | 1 |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Power Dissipation-Max | 95mW |
| Number of Bits | 4 |
| Propagation Delay | 24 ns |
| Turn On Delay Time | 24 ns |
| Family | LS |
| Min Input Voltage | 800mV |
| Logic Function | Binary Full Adder |
| Max Input Voltage | 2V |
| Output Polarity | INVERTED |
| Logic IC Type | ADDER/SUBTRACTOR |
| Max I(ol) | 0.008 A |
| High Level Output Current | -400μA |
| Low Level Output Current | 8mA |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74LS283NE4 Overview
This device is supplied in the PDIP package. Using 16terminations, it can be configured. Having a supply voltage of 5V enables to operate in a fully flexible manner. A total of 16pins are present on all components. As a result, it is packaged as Rail/Tube. In the circuit, there are 16pins that connect other parts. It is mounted using the way of [0]. It is a member of the family [0]. In the device, the information consists of 4 bits. In regard to this electronic device, FULL ADDER; WITH INTERNAL CARRY LOOKAHEAD; PERMITS RIPPLE CARRY CASCADINGare essential features. This device is manufactured in the temperature grade of COMMERCIAL. As a result of the voltage source, there is 5V voltage. For the device to operate, a voltage supply of 5Vis required. Long-term operation at 70°Cwith acceptable electrical stability is possible. Generally, the temperature limit is set at 0°Cso it will operate over a specified range. 5.25Vis the maximum voltage that the device can handle. It is possible for the device to operate at a voltage as low as 4.75V. This electronic part belongs to the Arithmetic Circuits family. The logic IC type is [0]. When a high-level voltage is applied to the output, there is -400μA current flowing into it. If a specified low-level voltage is applied to the output terminal, there is 8mA current flowing. The 1channels are designed to configure its foundation.
SN74LS283NE4 Features
Embedded in the PDIP package
FULL ADDER; WITH INTERNAL CARRY LOOKAHEAD; PERMITS RIPPLE CARRY CASCADING
Operating supply voltage of 5V
ADDER/SUBTRACTOR as logic IC type
SN74LS283NE4 Applications
There are a lot of Texas Instruments SN74LS283NE4 Counters & Dividers applications.
- Fixed or Programmable Frequency Division
- Control counters
- Clocks
- ALGEBRAIC COMPUTATION
- Analog multiplexing and demultiplexing
- Fixed and programmable counters greater than 10
- SQUARING
- ANALOG SIGNAL PROCESSING
- Dual Up Counters
- SQUARE ROOT