SN74LS195AN3
| Parameters | |
|---|---|
| Package / Case | PDIP |
| Surface Mount | NO |
| Pbfree Code | no |
| Number of Terminations | 16 |
| Additional Feature | COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT; J AND K(BAR) SERIAL INPUT |
| HTS Code | 8542.39.00.01 |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | THROUGH-HOLE |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 70°C |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Supply Voltage-Min (Vsup) | 4.75V |
| Number of Bits | 4 |
| Family | LS |
| Logic Function | Shift Register |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Propagation Delay (tpd) | 26 ns |
| fmax-Min | 30 MHz |
| Count Direction | RIGHT |
| Height Seated (Max) | 5.08mm |
| Length | 19.305mm |
| Width | 7.62mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74LS195AN3 Overview
There is a PDIP package embedded with the device. 16 is the total number of terminations on the chip. 5V is the operating supply voltage of the part. Electronic components belong to the LS group. This section has the following additional features: COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT; J AND K(BAR) SERIAL INPUT. This part must have a minimum supply voltage (Vsup) of 4.75V. A voltage of 5V is possible with this device. The maximum supply voltage (Vsup) for this part should not be more than 5.25V. There are 4 bits in the IC chip. 16 pins are present on it. Use it only at temperatures below 70°C.
SN74LS195AN3 Features
It supplies 5V power
SN74LS195AN3 Applications
There are a lot of Texas Instruments SN74LS195AN3 Shift Registers applications.
- Sequence generator
- Delay Line
- Remote control holding register
- Serial-to-parallel data conversion
- store data in digital form
- Pulse Extenders
- Data manipulation
- data transfer
- LED matrix control
- Remote control holding register