SN74LS195AN
| Parameters | |
|---|---|
| Package / Case | PDIP |
| Surface Mount | NO |
| Pbfree Code | no |
| Number of Terminations | 16 |
| Additional Feature | COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT; J AND KBAR SERIAL INPUT |
| HTS Code | 8542.39.00.01 |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | THROUGH-HOLE |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 70°C |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Supply Voltage-Min (Vsup) | 4.75V |
| Load Capacitance | 15pF |
| Number of Bits | 4 |
| Family | LS |
| Logic Function | Shift Register |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Propagation Delay (tpd) | 26 ns |
| Power Supply Current-Max (ICC) | 21mA |
| fmax-Min | 30 MHz |
| Count Direction | RIGHT |
| Max Frequency@Nom-Sup | 30000000Hz |
| Height Seated (Max) | 5.08mm |
| Length | 19.305mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
SN74LS195AN Overview
PDIP is a package containing the embedded device. A total of 16 terminations can be found on the chip. This part has an operating supply voltage of 5V. In the LS series, the electronic component belongs. Additional aspects of this section are as follows: COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT; J AND KBAR SERIAL INPUT. This part must have a minimum supply voltage (Vsup) of 4.75V. It can deliver voltage at 5V. This part requires a maximum supply voltage (Vsup) of 5.25V. It has 4 bits in total. There are a total of 16 pins on it. Temperatures above 70°C must be avoided.
SN74LS195AN Features
It supplies 5V power
SN74LS195AN Applications
There are a lot of Texas Instruments SN74LS195AN Shift Registers applications.
- Generate time delay toward digital circuits
- temporary data storage
- Serial-to-parallel data conversion
- 8-bit data storage
- Data manipulation
- LED matrix control
- Flash Memory
- Dual-rank shift, hold, and bus applications
- Delay Line
- Remote control holding register