SN74LS195ADR
| Parameters | |
|---|---|
| Package / Case | SOIC |
| Surface Mount | YES |
| Pbfree Code | no |
| Number of Terminations | 16 |
| Additional Feature | COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT; J AND KBAR SERIAL INPUT |
| HTS Code | 8542.39.00.01 |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 70°C |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Supply Voltage-Min (Vsup) | 4.75V |
| Load Capacitance | 15pF |
| Number of Bits | 4 |
| Family | LS |
| Logic Function | Shift Register |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Propagation Delay (tpd) | 26 ns |
| Power Supply Current-Max (ICC) | 21mA |
| fmax-Min | 30 MHz |
| Count Direction | RIGHT |
| Max Frequency@Nom-Sup | 30000000Hz |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
SN74LS195ADR Overview
There is an embedded device in the package SOIC. This chip has a total termination count of 16. A voltage of 5V is specified for the part's operating supply. There is an electronic component in the LS. Additional aspects of this section are as follows: COMPLEMENTARY SERIAL SHIFT RIGHT OUTPUT; J AND KBAR SERIAL INPUT. There must be a minimum supply voltage (Vsup) of 4.75V for this part. There is a capability to deliver voltage at 5V. Ideally, the maximum supply voltage (Vsup) should not exceed 5.25V. The total number of IC chip bits is 4. In total, it has 16 pins. Temperatures above 70°C must be avoided.
SN74LS195ADR Features
It supplies 5V power
SN74LS195ADR Applications
There are a lot of Texas Instruments SN74LS195ADR Shift Registers applications.
- Generate time delay toward digital circuits
- Parallel to serial converter
- Interconnectors
- 8-bit data storage
- Serial to parallel converter
- ROM Chips
- Remote control holding register
- Serial-to-parallel data conversion
- data manipulation
- store data in digital form