SN74LS194ANE4
| Parameters | |
|---|---|
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | HOLD MODE |
| Technology | TTL |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of Bits | 4 |
| Propagation Delay | 26 ns |
| Family | LS |
| Logic Function | Shift Register |
| Direction | Bidirectional |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Power Supply Current-Max (ICC) | 23mA |
| Number of Input Lines | 6 |
| Number of Output Lines | 4 |
| fmax-Min | 25 MHz |
| Max Frequency@Nom-Sup | 25000000Hz |
| Height Seated (Max) | 5.08mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74LS194ANE4 Overview
Embedded in a package of type PDIP, the device is available for use. 16 is the sum of the number of terminations in the chip. The part's operating supply voltage is rated 5V. It has 16 pins. Mounting by Through Hole is recommended. In this case, the electronic component belongs to the LS. In terms of supply voltage, this chip operates within the range of 5V. The following additional aspects of this section are worth noting: HOLD MODE. In the device, there are 6 input lines. There is a capability to deliver voltage at 5V. The total number of IC chip bits is 4. It has a total of 16 pins. It should be used below 70°C. Ideally, it should not fall below 0°C. Under 5.25V, this voltage is employed. This supply voltage is employed higher than 4.75V. A total of 4 output lines need to be operated. This device consists of 1 circuits in total.
SN74LS194ANE4 Features
With 16 pins
Operate supply voltage at 5V
It supplies 5V power
With 4 output lines
SN74LS194ANE4 Applications
There are a lot of Texas Instruments SN74LS194ANE4 Shift Registers applications.
- Serial to parallel converter
- 8-bit data storage
- data manipulation
- Delay Line
- Sequence generator
- Data Processors
- Pseudo Random Pattern Generator
- Pattern Recognizers
- Counter
- Dual-rank shift, hold, and bus applications