SN74LS194ADG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | HOLD MODE |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of Bits | 4 |
| Propagation Delay | 26 ns |
| Family | LS |
| Logic Function | Shift Register |
| Direction | Bidirectional |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN PARALLEL OUT |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 6 |
| Number of Output Lines | 4 |
| fmax-Min | 25 MHz |
| Max Frequency@Nom-Sup | 25000000Hz |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74LS194ADG4 Overview
There is an embedded device in the package SOIC. This chip has a total termination count of 16. Its operating supply voltage is rated at 5V. 16 pins are present on the device. Mounting by Surface Mount is recommended. It is a component of the LS. The operating supply voltage of this chip is noted to be within the range 5V. Taking note of the following additional details: HOLD MODE. In the device, there are 6 input lines. A voltage of 5V can be delivered by it. The total number of IC chip bits is 4. In total, it has 16 pins. Under temperatures below 70°C, it is recommended to use it. It should not be less than 0°C when operating this device. This supply voltage is employed under 5.25V. Voltages higher than 4.75V are used for this supply. 4 output lines are available for operation. In this device, there are a total of 1 circuits.
SN74LS194ADG4 Features
With 16 pins
Operate supply voltage at 5V
It supplies 5V power
With 4 output lines
SN74LS194ADG4 Applications
There are a lot of Texas Instruments SN74LS194ADG4 Shift Registers applications.
- Flash Memory
- Output expansion
- Parallel to serial converter
- Interconnectors
- Pulse Extenders
- Data Format Converters
- Cache memory in CPU
- Pseudo Random Pattern Generator
- temporary data storage
- Data Processors