SN74LS166ADRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 139.989945mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | CLOCK INHIBIT |
| Subcategory | Shift Registers |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of Bits | 8 |
| Propagation Delay | 25 ns |
| Turn On Delay Time | 30 ns |
| Family | LS |
| Logic Function | OR, Shift Register |
| Direction | Unidirectional |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN SERIAL OUT |
| Trigger Type | POSITIVE EDGE |
| Power Supply Current-Max (ICC) | 32mA |
| Number of Input Lines | 9 |
| fmax-Min | 25 MHz |
| Max Frequency@Nom-Sup | 25000000Hz |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74LS166ADRG4 Overview
As a result, SOIC package contains the embedded device. 16 is the number of terminations on the chip. There is a Tape & Reel (TR) case containing it. 5V is the operating supply voltage of the part. A total of 1 elements can be found on this part. The device is equipped with 16 pins. It is recommended that the mount should be done by Surface Mount. The electronic component belongs to the LS. It's noted that the chip's operating supply voltage is in the range 5V. Additional aspects of this section are as follows: CLOCK INHIBIT. In the device, there are 9 input lines that are available for use. A device capable of delivering voltage at 5V can be used. There are 8 bits in the IC chip. This board has 16 pins in total. Under 70°C, it is recommended that it be used. For this device to work, it should not go below 0°C. A voltage of 5.25V is employed as the supply voltage. It is used at a voltage greater than 4.75V. There is a subcategory of it called Shift Registers.
SN74LS166ADRG4 Features
With 16 pins
Operate supply voltage at 5V
It supplies 5V power
SN74LS166ADRG4 Applications
There are a lot of Texas Instruments SN74LS166ADRG4 Shift Registers applications.
- Parallel data
- 8-bit data storage
- temporary data storage
- ROM Chips
- Data manipulation
- data manipulation
- Generate time delay toward digital circuits
- 7-segment display control
- Serial to parallel converter
- LED matrix control