SN74LS166ADRE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 139.989945mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | CLOCK INHIBIT |
| Subcategory | Shift Registers |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of Bits | 8 |
| Propagation Delay | 25 ns |
| Turn On Delay Time | 30 ns |
| Family | LS |
| Logic Function | OR, Shift Register |
| Direction | Unidirectional |
| Output Polarity | TRUE |
| Logic IC Type | PARALLEL IN SERIAL OUT |
| Trigger Type | POSITIVE EDGE |
| Power Supply Current-Max (ICC) | 32mA |
| Number of Input Lines | 9 |
| fmax-Min | 25 MHz |
| Max Frequency@Nom-Sup | 25000000Hz |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74LS166ADRE4 Overview
SOIC package contains the device. 16 is the number of terminations on the chip. It is packed in a case number Tape & Reel (TR). Voltage rating of the part is 5V. A total of 1 elements can be found on this part. It is equipped with a pin count of 16. It is recommended to mount by Surface Mount in order to get the best results. There is an electronic component in the LS. As noted, this chip operates within the range of 5V. Additionally, please note the following: CLOCK INHIBIT. This device has 9 input lines available. Voltage can be delivered at 5V. There are 8 bits on the IC chip. It has a total of zero pins. A temperature below 70°C is recommended for its use. In order to operate the device, the value should not fall below 0°C. We use this supply voltage under 5.25V. This supply voltage is employed higher than 4.75V. There is a subcategory of it called Shift Registers.
SN74LS166ADRE4 Features
With 16 pins
Operate supply voltage at 5V
It supplies 5V power
SN74LS166ADRE4 Applications
There are a lot of Texas Instruments SN74LS166ADRE4 Shift Registers applications.
- Flash Memory
- Output expansion
- Sequence generator
- Serial to parallel converter
- Remote control holding register
- Generate time delay toward digital circuits
- 8-bit data storage
- data manipulation
- ROM Chips
- Pattern Recognizers